Competition Composites Inc. installs large 5-axis CNC milling machine : CompositesWorld

New 5-axis CNC milling machine to enhance Competition Composites Inc.’s capabilities on larger composite tooling projects and one-off fabrications. CCI’s new milling machine, a custom assembly by Mechatronic Design Solutions Inc., has a working envelope of 5m x 2m x 1.5m and can shape most non-metallic materials. Fiberglass and carbon fiber composite product manufacturer Competition Composites Inc. (CCI, Arnprior, Ontario, Canada), has announced the installation of a large 5-Axis CNC milling machine.  The new milling machine, a custom assembly by Mechatronic Design Solutions Inc. (Ottawa, Ontario, Canada), has a working envelope of 5m x 2m x 1.5m and can shape most non-metallic materials. It complements CCI’s two pre-existing 3-Axis milling machines. Aircraft Part Machining CCI says that while the investment is primarily intended to enhance the company’s capabilities on larger composite tooling projects and one-off fabrications in its core business, the machine will also be an asset for customers in the area with a need to outsource large 3D milling projects. The company says it has also purchased a 3D Scanner for First Article verification.   Glass fiber/epoxy prepregs h...

Swap out those old crappy 3-way light switches for good

Don’t put up with old three-way light switches like this. Swap them out for something new and improved. Archaic light switches might as well be from the stone age. All they do is turn a light on and off. They can’t dim lighting gently or remember the brightness level you prefer. Outdated switches don’t play nicely with LED bulbs either. The solution? Swap them for modern switches. This guide will take you through the steps of replacing those aging three-way light switches with updated wall controls. This process can be tricky, so read through the steps before you start your project. In some cases, it might be best — and safest — to contact an electrician. The most basic three-way switch setup has two switches that connect and control one light fixture, like switches on either end of a hallway, staircase or large living area. In most cases the light (or array of lights) they operate sit on the ceiling above. Specifically these are hard wired lights, not merely lamps plugged into outlets. You won’t need many tools for this job. The necessary supplies though are critical so make sure you have them on hand. Here’s the list: Safety should be ...

The best Lodge cast iron pan is at an all-time low price

Lodge cannot be beat when it comes to cast-iron cookware, and right now one of their best pans is down to its lowest price. This conversation is moderated according to USA TODAY’s community rules. Please read the rules before joining the discussion. Nothing beats the cooking power of a cast iron pan, and right now you can save on one of the best. (Photo: Lodge) — Our editors review and recommend products to help you buy the stuff you need. If you make a purchase by clicking one of our links, we may earn a small share of the revenue. However, our picks and opinions are independent from USA Today’s newsroom and any business incentives. Don’t own a cast-iron skillet yet, but always been curious to try one out in your kitchen? Cast iron pans and skillets aren’t too expensive, and can honestly last a lifetime assuming you care for them properly. They’re great for frying foods, baking breads and pizzas, searing steaks, and pretty much any other cooking task you can think of. In terms of the best cast-iron cookware on the market, Lodge is most definitely the cream of the crop, and right now you can get one of their most popular pans at its lowest price. Their D...

Woven Jacquard Fabric Suppliers – Wholesale Manufacturers and Suppliers For Woven Jacquard Fabric

Please fill in your details to download the Table of Contents of this report for free. We also do customization of these reports so you can write to us at mi@fibre2fashion.com in case you need any other additional information. GSM (Gram / Sq meter) : 125-130 GSM Material/Composition : 100%Polyester Fabric type : Dyed Weave type : Jacquard Manufacturing technique : Jacquard Fabrics Width : 56″ Min Order : 200 Meters Production Capacity : 20000 Meters Export Market : Worldwide Sampling : Paid Place of origin : India Payment Terms : L/C,Money Gram,T/T,Western Union,Wire Transfer Delivery Time : 30 DAY Packaging Details : Roll Packing Waterproof Mattress Protector, Waterproof Pillow Cover – Meishi,https://www.gzmeishitextile.com/

Arctic Liquid Freezer II series looks … interesting

Arctic launches its new Liquid Freezer II series of AIO water coolers. Designed for high performance, the second generation Liquid Freezer includes four product versions: Liquid Freezer II 120, Liquid Freezer II 240, Liquid Freezer II 360, and Liquid Freezer II 280. For the Liquid Freezer II series, ARCTIC has incorporated an in-house developed PWM-controlled pump with a copper bottom plate. At low loads, the pump reduces rotational speed, thereby lowering power consumption. The 40mm fan on the pump provides consistent cooling for the motherboard voltage converter, while the sealed water circuit is maintenance-free. Thanks to its flat design and compact pump, the Liquid Freezer II fits into many cases and offers optimal RAM compatibility, even for modules with larger heatsinks. Each Liquid Freezer II model is compatible with all common AMD and Intel sockets. All versions of the Liquid Freezer II use tried and tested, pressure-optimized ARCTIC P fans, which are characterized by their durability. The new Liquid Freezer II coolers have been tailored to suit the needs of gamers and other demanding users. Compared to the predecessor series, they achieve even greater cooling performa...

With the stated intent of combating illegal immigration, Senators Chuck Schumer (D., N.Y.) and Lindsey Graham

With the stated intent of combating illegal immigration, Senators Chuck Schumer (D., N.Y.) and Lindsey Graham (R., S.C.) are crafting new legislation to institute a national identification card. The card would be required in order to be eligible for employment, and would in turn enable employers to identify and reject illegal immigrants who are seeking work. The card would be biometric, i.e., containing identifying characteristics unique to the physiology of the cardholder. In this case the biometrics would most likely be comprised of either a fingerprint or a scan of the veins on the back of the hand. This is not the first time a biometric card has been proposed: in the wake of 9-11, there was a strong push for a national ID card on the basis of national security. Schumer and Graham claim that the institution of a national ID would not be accompanied by the creation of a complementary database; however, no national identification system has ever operated independently of a database. It would be impossible to run a national ID system without a corresponding database available for purposes of verification. Thus, although the card would initially include only biometric and citize...

Video Shows Power Isn’t Everything In Laser Engraving

When it comes to power tools, generally speaking more watts is better. But as laser maestro [Martin Raynsford] shows, watts aren’t everything. He shares a brief video showing his older 100 W laser being handily outperformed by a newer 30 W machine. Shouldn’t the higher power laser be able to do the same job in less time? One might think so, but wattage isn’t everything. The 30 W laser engraves and cuts a wooden tile in just under half the time it takes the 100 W machine to do the same job, and with a nicer end result, to boot. Why such a difference? Part of the answer to that question lies in that the newer machine has better motion control and can handle higher speeds, but the rest is due to the tubes themselves. The older 100 W machine uses a DC-excited (big glass water-cooled tube) CO2 laser, and the newer 30 W machine uses an RF-excited laser that looks a bit like a big metal heat sink instead of oversized lab glassware. Both tubes output what is essentially the same beam, but the RF tube is overall capable of a more refined, more stable, and more finely focused point than that of the glass tube. Since engraving uses only a small fraction of even the 30 W laser’s power, the ...

See Pete Buttigieg’s logo and branding for the 2020 presidential race

An award-winning team of journalists, designers, and videographers who tell brand stories through Fast Company’s distinctive lens On Sunday, Pete Buttigieg formally announced his candidacy in South Bend, Indiana, where he has served as mayor for eight years. Just a few months ago, few people had heard of Buttigieg and fewer still could pronounce it. (His campaign encourages people to pronounce it “Boot Edge Edge.”) But he caught many people’s attention at a CNN Town Hall in March, standing out in the crowded field of Democratic hopefuls as the youngest candidate at 37, who also happens to be openly gay, a vet who fought in Afghanistan, and a progressive who has won support in a conservative Rust Belt state. He’s since seen surge of interest over the past six weeks. A poll on Friday placed him third among voters in Iowa and New Hampshire, after Bernie Sanders and Joe Biden. [Image: courtesy Hyperakt]In addition to officially joining the presidential race, this announcement was an opportunity for Buttigieg to unveil his new campaign design and website, created by Brooklyn-based design firm Hyperakt. The new logo features a yellow backdrop with the word “PETE” in bold blue in...

Samsung OMN and OMN-D Digital Signage Fosters a New Era of Business

Samsung OMN and OMN-D Digital signage products are helping quick service restaurants (QSRs) and other businesses communicate with customers. A new set of solutions designed to meet the rapidly increasing demand for quick service restaurant (QSR) environments, the Samsung OMN and OMN-D products provide a range of display options. Samsung entered the QSR market about six years ago, and the company says that today’s market conditions, which include the use of apps driving business towards services such as Doordash, Grubhub and UberEats, as well as Millennial purchase habits, are greatly impacting a number of markets. The company says that businesses are taking the data cultivated from apps, and applying that information to digital signage and offering pro-integrator initiatives such as customer loyalty programs. Andrew Catellier, senior business development manager, Samsung Electronics, mentions that some of the information included in digital signage applications include calorie counts, which are required by law for restaurant chains that have more than five restaurants. “The current law has been suspended I think, but you are seeing the trend, but everything is moving to a health...

Sienna Biopharmaceuticals’ Novel Silver Photoparticle Technology SNA-001 Successfully Removes Light Hair When Used with Common Laser System Nasdaq:SNNA

– SNA-001 addresses a large unmet need in laser hair removal by treating light hair using a topical solutionof silver photoparticles, an ultra-efficient light absorber – – If cleared, SNA-001 has potential to expand the $3 billion U.S. laser hair removal market as an effective option for light-haired consumers – – Sienna to seek strategic partner for SNA-001, and will continue to focus on Phase 3 development of SNA-120 for Psoriasis and Pruritus and its Topical by Design™ Platform – WESTLAKE VILLAGE, Calif., Feb. 08, 2019 (GLOBE NEWSWIRE) — Sienna Biopharmaceuticals, Inc. (NASDAQ:SNNA), a clinical-stage biotechnology company, today announced positive topline results from its pivotal trial of SNA-001 in conjunction with an 810 nm Diode laser, involving 65 patients. SNA-001, a topical pre-treatment to standard laser hair removal, was studied in women and men with white, gray, blonde, light red and light brown hair. The data showed SNA-001 met the primary endpoint of non-inferiority in hair reduction (-17.5 percent with SNA-001+Laser compared to -1.1 percent with vehicle+Laser following six treatment sessions). In additional analyses, SNA-0...

Church of MO: 2009 Harley-Davidson VRSCF V-Rod Muscle

Let us open our hymnals to the song of the 60-degree liquid-cooled Porsche-designed V-Rod engine, whose 2001 launch represented the last Radical Departure for Harley-Davidson. With its hydroformed frame and underseat gas tank, this bike was the way to the future, one that sadly ended after 2017. In this review of the new V-Rod Muscle from 10 years ago, you can feel Pete “the Rock’s” pain as he struggles to produce faint praise. Ashes to ashes, dust to dust. Like the new, robust chassis on Harley-Davidson’s touring machines, news about a brand new V-Rod is only weeks old, but like the touring bikes, our time at the recent ‘09 H-D model launch presented an opportunity to cop a ride on the new V-Rod Muscle.The long, low and clean look of this latest VRSC family member strikes a familiar pose to that of the other two V-Rods, the intimidating blacked-out (and now Dark Custom member) Night Rod Special and the more simple but classic-looking V-Rod. The LED stop/turn/tail-light integrated into the rear fender is a brilliant design feature. Also note here, and in other photos, the slightly more angular shapes of some of the bodywork. The Muscle is primarily a styling exercise. Rather...

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (See General Instruction A.2 below): Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter). Liberated Solutions, Inc. (the “Company”) is filing this Amendment No. 1 on Form 8-K/A (this “Amended Filing”) to amend its Current Report on Form 8-K filed with the Securities and Exchange Commission (“SEC”) on September 16, 2019 (the “Original Filing”), for the purpose of including the pro forma financial information required by Item 9.01 and correcting certain other disclosures in the Original Filing, as follows: This Current Report on Form 8-K (this “Report”) and other reports filed by registrant from time to time with the Securities and Exchange Commission (collectively, the “Filings”) contain or may contain forward-looking statements and information that is based upon beliefs of, and information currently available to, registrant’s ma...

1234 Next > >> Page 1 / 4